A geyser is a basic need of the household as it gives hot water for bathing, cooking, cleaning, and other household activities. Sometimes, there will be a crucial point in life when you wish to install a geyser at home but the task may seem tedious and challenging, nevertheless, if you have the appropriate assistance to comply with then it can be easily done. Whether you’re replacing an old geyser or installing a new one, doing it in your house takes time and effort. This blog will take you to the step-by-step guide to installing a new geyser at home, by ensuring that the installation is done without hassle.
Step 1: Assess Your Space & Select the Suitable Geyser
Before starting with Geyser Installation Service In Karachi, it is most important to identify which type of geyser you require. Different types, sizes, and capacities of geysers are:
Capacity:
10-25L geyser might be sufficient for a small family and for those who have bigger families, they will need a 50L or possibly even 100L geyser.
Geyser type:
Electric, gas + solar geysers depend on your energy use preference and the infrastructure that is already available in your house.
Energy Efficiency:
Choose Energy-efficient models having high energy ratings. Because high-efficiency models will lessen energy costs well after the retrofits are complete.
Also consider where you would like to place the geyser. It ought to be where the water pipes need to be and if it is electric, electrical outlets as well.
Step 2: Disconnect Water Supply and Electricity
Prior to carrying out any installation work, you should ensure that the home water supply is turned off and no power sources are connected. Remember, safety should always be your top priority when working with electrical and gas systems!
For Electric Geysers:
Turn off the power from the circuit breaker to prevent the risk of electric shocks. Verify that the power is off using a voltage tester.
Gas Geysers:
Turn off the gas supply to the unit. Check the gas line for any leaks or damage before proceeding.
Step 3: Remove the Old Geyser (If Applicable)
If you are replacing an old geyser, you need to dispose of the same first. To doing this: first you will disconnect the water pipes. Unscrew inlet and outlet water pipes from old geyser using a pipe wrench. Do not be surprised if there is still water that comes out. Now unscrew the geyser unit. Remove the geyser from its fixture, ensure that you keep at least one pair of hands ready here because larger and heavier geysers can be heavy. You might also have to disconnect any extra parts like a temperature and pressure relief valve, electrical connections or gas line. Before the old geyser is removed, examine the area for leaks or mineral deposits and repair or replace any affected units if applicable. Once the old geyser has been removed, prepare to enter into the next phase and get ready for your new geyser installation.
Step 4: Prepare the Installation Area
After taking away an old geyser (if applicable) you will have to get the setting up area ready for the new unit.
The place of mounting:
In case to install wall-mounted geyser, check if the wall is secure enough to hold the weight of the new unit. Make sure it is studded up with a stud detector.
Inspect the Water and Geyser Piping:
The incoming and outlet pipes should be connected to the new geyser. You may have to adjust some pipework or even install new ones.
Step 5: Install the New Geyser
After the space is ready, carry out the installation:
Position the Geyser:
Make sure the geyser is stable and secure by carefully placing it in its mounting spot.
Connect the pipes for the inlet and outlet:
Attach the hot water exit pipe and the cold water intake pipe to the corresponding geyser fittings. Installing the pressure relief valve is crucial for safety. As directed by the manufacturer, attach it to the geyser.
Connect the Electrical Wiring (for Electric Geysers):
You must connect the electric geyser to the electrical supply prior to installation. For this stage to be completed securely, a certified electrician might be needed.
Install the Expansion Tank (if needed):
To handle the pressure from hot water, an expansion tank may be needed in certain situations, particularly for huge geysers.
Step 6: Examine the system
After everything is linked, the system needs to be tested. Turn on the water supply by opening the valve and inspecting any connections for leakage. Any loose fittings should be tightened.
Switch on the Gas or Power Supply:
To restart an electric geyser, turn on the circuit breaker. Turn on the gas supply for gas geysers.
Check the heater:
Check to see if the geyser begins heating the water after setting the thermostat to the temperature you want.
Step 7: Check for leaks and Final Adjustments
Verify all connections once more to make sure there are no leaks once the geyser has heated the water. You can finish the installation and completely secure the unit if everything is in working condition. Lastly, make sure the geyser is operating properly by pouring a few liters of hot water through the system.
Conclusion
A little planning, the appropriate equipment, and patience are needed when installing a new geyser. Whether you are installing a new unit or replacing an old one, following this step-by-step guide guarantees a safe and effective approach. To prevent errors or potential risks, it is always better to get professional help from FixDar, if you have any questions regarding any aspect of the installation. Keep in mind that the right Geyser Installation Services are essential to guaranteeing the geyser operates safely, effectively, and correctly.
